Rockwell Automation 500LG Lighting Contactor Instruction Manual - Manual (Page 7)

Installing Bulletin 500LC Lighting Contactors 7
Publication 500LC–IN001A–EN–P May 2005
Bulletin 500LC Lighting Contactor containing all N/O contacts
Field Installed Modifications — Drawing E
CONTROL MODULE
MOD.
500LC–47CM*,
500LC–48CM*, or
500LC–49SS*
CONTROL MODULE
MOD. 500LC–47CM*, 500LC–48CM*, or 500LC–49SS*
WITH OPTIONAL MODIFICATIONS
MOD. 500LC–141C, –142C, –47CM*, –48CM*, OR –49SS*
WITH OPTIONAL MODIFICATIONS
MOD. 500LC–141C, –142C, –47CM*, –48CM*, OR –49SS*
MOD. 500LC–141C
MOD. 500LC–142C
GENERAL NOTES:
1.
CUSTOMER CONNECTIONS TO LINE AND LOAD WILL ACCEPT NO. 10 AWG TO 18
AWG COPPER WIRE.
2. CUSTOMER CONNECTIONS TO ELECTRONIC MODULE (MOD. 500LC–47CM*,
500LC–48CM*, 5 00LC–49SS*) WILL ACCEPT NO. 12 AWG TO 22 AWG COPPER WIRE.
3. LEADS ON CONNECTORS FOR MOD. 500LC–141C & 500LC–142C ARE NO. 18 AWG
(12” LONG).
4. WEIGHT: 2–6 POLES: 2.3 LBS. MAX (1.05 KG)
8–12 POLES: 3.0 LBS. MAX (1.36 KG)
( DOES NOT INCLUDE SHIPPING CARTON)
REFERENCE NUMBER
DENOTES POLE
LOCATION
(REFER TO CHART)
MOUNTING
HOLES
ACCEPT
#10 SCREWS
BLACK
ORANGE
BROWN
2 – 6 POLE
8 – 12 POLE
7.30
185.4
MAX.
8–12
POLES
3.70
93.0
MAX.
5.90
150.0
MAX.
3.50
89.0
MAX TYP
3.75
95.3
4.30
109.2
MAX.
7.30
185.4
MAX.
6.50
165.1
2–6
POLES
CONTACTS 1–6 AND 7–12 WILL BE OPENED BY APPLYING VOLTAGE TO “L” AND “O”.
CONTACTS 1–6 AND 7–12 WILL BE CLOSED BY APPLYING VOLTAGE TO “L” AND “C”.
CONTACTS POLE LOCATION CHART