Rockwell Automation 284G ArmorStart - Safety Version - Getting Started - Manual (Page 11)

Publication 284GS-QS001A-EN-P - May 2009
11
Grounding
Connect a grounding conductor to the terminal provided as standard on each
ArmorStart Distributed Motor Controller. Refer to Table 2 for grounding
provision location. There is also an externally available ground terminal.
Refer to Figure 10.
LED Status Indication The LED Status Indication provides 4 status LEDs and a Reset button. The
LEDs provide status indication for the following:
• POWER LED
The LED is illuminated solid green when control power is present and
with the proper polarity
• RUN LED
This LED is illuminated solid green when a start command and control
power are present
• NETWORK LED
This bi-color (red/green) LED indicates the status of the
communication link
• FAULT LED
Indicates Controller Fault (trip) condition
The “Reset Button” as a local trip reset.
Figure 7 LED Status Indication and Reset