Rockwell Automation 836E Solid-State Pressure Sensors - Manual (Page 5)

Product Identification
5
2 Product Identification
Fig. 1: Explanation of the nameplate - see table below
Notes:
•
Specifications and ratings may differ from those shown in Figure 1, depending on particular
model. Refer to product nameplate or catalog for actual ratings and specifications.
• The series number indicates the version of the switch. A change in the series letter does not
have any effect on the compatibility (see also Section 6 — Troubleshooting).
• The MWP (maximum working pressure) is specified on the nameplate. This value refers to
a reference temperature of +20 °C (68 °F) and may be applied to the device for an
unlimited time.
• The test pressure (Over Pressure Limit [OPL]) corresponds to 1.5 times the MWP and may
be applied only for a limited time before causing damage to the switch.
1 Catalog number 6 Max. working
pressure 11 Wiring diagram
2 Series letter 7 Wetted part materials 12 Approvals
3 Serial number 8 Output
4 Enclosure rating /
Ingress protection 9 Current consumption
5 Operating pressure 10 Operating voltage
PNP / 4…20mA
836E-DC1CC1D4 836E-DC1CC1D4