Original instructions – Rockwell Automation 445L Floor Mounting Column and Cantilever User Manual User Manual
Page 7
Advertising
Floor Mounting Stand and Cantilever User Manual
5
Original instructions
Step 3: Securing 500 mm cantilever to post
Step 4: Installing muting sensors and reflectors
Step 5: Installing reflector
Hold the cantilever profile between the universal fastening sets. Using a #4
hex tool tighten the hex head screws.
Mount the muting sensor to the bracket. Mount the muting sensor and the
bracket to the slot in the extrusion using the supplied hardware.
Mount the reflector to the supplied bracket. Mount the bracket to the
extrusion slot using the supplied hardware. Position the reflector and
tighten bracket hardware.
Advertising