Rockwell Automation 445L Floor Mounting Column and Cantilever User Manual - Manual (Page 8)

Floor Mounting Stand and Cantilever User Manual
6
Original instructions
Step 6: Mount cover profiles
Dimensions [mm (in.)]
Run cables in the slots once the system is complete. Finish the assembly by
positioning the profile covers. Using a rubber mallet or a block of material
that will not damage the material, lightly tap the cover profiles in place.
60
(2.36)
12
(0.47)
2015
(79.3)
2000
(78.7)
60
(2.36)
20 (0.79) defined at installation
80
(3.15)
500 (19.69)
503 (19.80)
9.4
(0.37)
60
(2.36)
60
(2.36)
40
(1.57)
300 (11.81)
cover for cable
locate appropriately
24 (0.94)
30 (1.18)
3 x M12
R 5.50 (0.22)
10°
14
(0.55)
R 105 (4.13)
30
(1.18)
30 (1.18)
150
(5.91)
100
(3.94)
240 (9.45)
Base Plate