Braun NL Series - Manual (Page 21)

Page 19
Operation Notes and Details
horizontal (bridging) position
ZKHQLWUHDFKHVYHKLFOHÁRRUOHY-
el. The roll stop must overlap the
lift base plate a minimum 1/2".
When the FOLD switch is
pressed and the platform folds
IURPÁRRUOHYHOWRWKHVWRZ YHUWL-
cal) position, the roll stop auto-
matically travels inboard to the
stowed position.
Interlock Features: The inner
roll stop features a locking
mechanism that prohibits the plat-
form from lowering if the lock is
not engaged. The inner roll stop
also senses weight to prohibit lift
operation. The lift will not function
if inner roll stop is occupied.
Discontinue lift operation im-
mediately if the inner roll stop
does not operate properly.
Outer Barrier: This cylinder-pow-
ered barrier provides a ramp for
wheelchair loading and unloading
at ground level (see photos on
following page). When the plat-
form lowers fully to ground level,
the cylinder compression spring
WARNING
Discontinue lift use
immediately if any
lift component does
not operate prop-
erly. Failure to do so
may result in serious
bodily injury and/or
property damage.
automatically unfolds (rotates)
the barrier to the ramp position
(fully unfolded).
Although the outer barrier is
lift-powered, the activation of
the barrier is controlled by the
lift operator (attendant). Press-
ing the DOWN switch unfolds
the barrier. The outer barrier is
cylinder-powered to automati-
cally fold (rotate) to the vertical
position as shown when the UP
switch is pressed (barrier raises
before platform raises).
Interlock: The outer barrier
senses weight to prohibit lift op-
eration. The lift will not function
if the outer barrier is occupied.