Braun NL Series - Manual (Page 46)

Page 44
Maintenance and Lubrication Schedule
750
Cycles
Outer barrier hinge pivot points (2)
Outer barrier latch (pivot/slide points)
Outer barrier latch lever pivot points
Lift-Tite ™ latches (tower pivot points - 2)
Lift-Tite ™ latch gas (dampening) spring pivot
points (2 springs - 4 points)
Inspect Lift-Tite ™ latches and gas springs for wear
or damage (bent, deformed or misaligned), posi-
tive securement (external snap rings) and proper
operation
Inspect outer barrier for proper operation
Inspect outer barrier latch for proper operation,
positive securement, and detached or missing
spring
Inspect lift for wear, damage or any abnormal
condition
Inspect lift for rattles
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Resecure, replace defective parts or otherwise
correct as needed. Note: Apply Light Grease to
Lift-Tite
™ latch tower pivot point if replacing latch.
Correct or replace defective parts.
Correct or replace defective parts and/or relubri-
cate. See Lubrication Diagram
Correct as needed.
Correct as needed.