Rockwell Automation 1441-DYN25-Z Dynamix 2500 Data Collector - Manual (Page 134)

134 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 5 Collecting and Reviewing Data
A selection screen appears. A checkmark next to the item indicates that a
measurement has been stored.
3. Select an item and press the Left arrow.
4. Continue collecting data and move through the list until you reach the end
of the list.
TIP The Selection screen does not appear if you set
Navigation to DataPac in the Setup screen. The Dynamix
2500 data collector automatically moves to the next
point in the route when the Right arrow key is pressed.