J1 to 50-pin terminal block kit diagram – Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual User Manual
Page 209
Publication 1398-5.2 – PDF 1997
Cable Diagrams, Schematics and Examples
B-7
Figure B.5
J1 to 50-pin Terminal Block Kit Diagram
(P/N 9101-1391 and 9101-1560)
Intro
Mounting bracket 0002-7069 (shown) and cable 9101-1369-003 supplied with 9101-1391 kit.
Mounting bracket 0002-7069 (shown) and cable 9101-1369-010 supplied with 9101-1560 kit.
NOTES:
The terminal block and cable provide a one-to-one transfer of the signals from the connector to
the respective pin(s) on the terminal block.
The cabling examples beginning on page B-24 depict the use of this kit to pass a cable through
a restricted bulkhead.
Mounting bracket 0002-7069 (shown) and cable 9101-1369-003 supplied with 9101-1391 kit.
Mounting bracket 0002-7069 (shown) and cable 9101-1369-010 supplied with 9101-1560 kit.
NOTES:
The terminal block and cable provide a one-to-one transfer of the signals from the connector to
the respective pin(s) on the terminal block.
The cabling examples beginning on page B-24 depict the use of this kit to pass a cable through
a restricted bulkhead.