The drive and motor are correctly wired – Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual User Manual
Page 34
Advertising
Publication 1398-5.2 – PDF 1997
2-4
Unpacking, Inspecting and Storing
●
Drive power wiring is correct and start-up logic is functioning.
●
The drive and motor are correctly wired
●
Drive serial communications are operational
Before beginning the “Initial Power-up”, please check the following:
●
All wiring and mounting to verify correct installation
●
Input voltages to ensure they do not exceed specifications for the
drive or motor.
Advertising