Before you install the motor – Rockwell Automation Y-Series Brushless Servo Motor User Manual
Page 4
Advertising
4 Y-Series Motor Installation Instructions
Publication 1398-IN518A-EN-P — January 2001
Before You Install the Motor
Before installing or storing the motor:
1. Remove the motor carefully from its shipping container.
2. Visually inspect the motor for any damage.
3. Examine the motor frame, front output shaft, and mounting pilot
for any defects.
4. Notify the carrier of any shipping damage immediately.
ATTENTION
Do not open or attempt to open the motor.
Only a qualified Allen-Bradley employee can
service this type of motor
Failure to observe these safety procedures could
result in the equipment being damaged.
Advertising