Rockwell Automation Y-Series Brushless Servo Motor - Manual (Page 8)

8 Y-Series Motor Installation Instructions
Publication 1398-IN518A-EN-P — January 2001
Installing Your Motor
Y-2006, Y-2012, and Y-3023 motors include a mounting pilot for
aligning the motor on a machine. Preferred fasteners are stainless
steel. The installation must comply with all local regulations and use
of equipment and installation practices that promote
electromagnetic compatibility (EMC) and safety.
ATTENTION
Unmounted motors, disconnected mechanical
couplings, and/or disconnected cables are
dangerous if power is applied.
Disassembled equipment should be appropriately
identified (tagged-out) and access to electrical
power restricted (locked-out).
Failure to observe these safety procedures could
result in personal injury