Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 36)

36 Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
Chapter 3 Display Modes
G Button
This function key is used to display generated or consumed power, or real,
reactive, and apparent energy.
This button toggles the display between generated energy (from load to supply)
and consumed energy (from supply to load) each time it is pressed. When the G
is highlighted (yellow background) the display shows generated energy.
PF Button
In 3L display mode, the PF (Power Factor), DPF (Displacement Power Factor
[fundamental V, I, phase shift]) or Cosine  values and the Tangent  can be
displayed by pressing the PF button.
Four Quadrant Power Diagram
07/25/02 50.00Hz 10:59 100%
3L
L1
L2
L3
0.634
0.999 0.999
-0.439 +0.050 +0.035
0.998 0.995 PF
DPF
Tan
1 2 3
W... PF...
0.742
Power Factor
DPF or Cosine
ϕ
Tangent
ϕ
-W +W
+Var
-Var
Produced Consumed
1 2
4 3
Reactive Power - from load
Reactive Power - from supply