Select a graphic display for recorded measurements, Example when vrms is selected – Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor User Manual
Page 44
44
Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
Chapter 3
Display Modes
Select a Graphic Display for Recorded Measurements
Recorded data can be displayed in graphic form.
Select the recording to be displayed by using the Up/Down Cursor buttons.
Then, open the recording by pressing Enter.
Use the function buttons to enable direct selection of the measurement to be
displayed.
Pressing ../.. lets you scroll through all the measurements selected when the
record was programmed.
Example When Vrms is Selected
Display of the average voltage for each of the three voltages. Moving the
cursor with the Left/Right Cursor buttons updates the values to reflect the
new cursor position.
Selection of the three phases or each phase separately with the Up/Down
Cursor buttons.
Returns to the screen where the measurement to be displayed is selected.
07/25/02 10:56
100%
RECORDING
F
Urms
Uthd
Ucf
Vrms
.. / ..
SELECTION OF MEASUREMENT TO VIEW
START :
07/25/02 17:58
END :
07/25/02 18:27
PERIOD :
1 mn
(1%)
TEST
220.0V
210.0V
200.0V
mn>
Vrms
10
15
20
25
30
203.4
v
204.7
v
204.0
v
3L
L1
L2
L3
07/25/02 10:38
100%
07/25/02 10:13:21
1
2
3
2
1
3