Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW - Manual (Page 15)

Upgrading your 1394 GMC Turbo Firmware 15
Publication 1394–6.3 – November 1997
2. At the command prompt, type bz and press Enter. The following
messages appear:
Update flash Memory Utility
Enter Password (not echoed):
3. Type obrut and press Enter. You will not be able to see the
letters you are typing. The following message appears:
Do you wish to download new operating system
F/W ? (Y | N)
4. Type Y. The following message appears:
OK to proceed w/ Download (Y | N).
5. Type Y. The following message appears:
Disabling all interfaces except PORT A
Awaiting download of code....
6. From the Transfer menu, select Send Binary File. The following
window appears:
7.
If you have a: Then:
1394–SJTxx–T–RL module
1. Select the 30810xxx.RAP
file from the disk drive
directory.
2. Select OK.
1394–SJTxx–T module
1. Select the 30800xxx.RAP
file from the disk drive
directory.
2. Select OK.
At this point the file begins to transfer from your computer to an
unused portion of the 1394 system memory (DRAM).