Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW User Manual
Page 5
Advertising
Upgrading your 1394 GMC Turbo Firmware
5
Publication 1394–6.3 – November 1997
11. Make the following selections in the COMx Properties window:
12.Select OK. The COM Port Properties window disappears.
Establishing Communications with the 1394 GMC Turbo
To establish communications between the 1394 GMC Turbo and the
HyperTerminal program on your PC:
1. Verify that all 460/380V power has been removed from the
system.
!
ATTENTION: To avoid the risk of injury, verify
that all 460/380V power has been removed from the
system. Bus voltage is not required for this
procedure.
2. Apply 24V Control power to the 1394 GMC Turbo. Refer to
Chapter 2 of the 1394 User Manual (publication 1394–5.0) for
more information on control power.
3. Open the system module door.
Advertising