Rockwell Automation 1502 400 Amp Medium Voltage Contactor (Series D) - Manual (Page 52)

6-2 Spare Parts
1502-UM050D-EN-P – June 2013
Table 6.A – Spare Parts
Part Number
Item
Description of Parts
120 V Control 400 A
1 Three (3) Vacuum Bottles X 80157 -496-52
2 Closing Coil (electrically held) 80153-576-51
3 Closing Coil (mechanical latch) 80154-134-51
4 Hol d-in Coil 80153-575-51
5 Mechanical Latch Trip Coil (120 VAC) 80025-833-01
Elect. held, normal drop-out 80153-554-52
Elect. held, fast drop-out 80153-554-56
6
Auxiliary Assemblies š
Mechanical latch 80153-999-60
7 Return Springs (standard altitude 0-1000 m) [ 80153 -567-01
8 Coil Retaining Ring 28325-042-01
9 Stop Bracket 80153-565-01
10 Auxiliar y Actuator Plate 80153-553-02
11 Armature Plate (electrically held) 80153-552-02
12 Armature Plate (mechanical latch) 80153-781-02
13 Mechanical Latch Roller Bearing 80153-748-01
14 Mechanical Latch Roller Bearing Shaft 80153-744-02
15 Mechanical Latch Roller Bearing Shaft Retaining Clip M-5605
16 Mechanical Latch Auxiliary Contact Block 800T-XD2
Part Number
Item
Description of Parts
230 V Control 400 A
Closing Coil Z 80153 -576-52
Hold-in Coil Z 80153 -575-52
Auxiliary Assembly Z 80153 -554-59
X Rockwell Automation recommends that if the contactor has been in service, all three (3) bottles be replaced
at the same time.
Y The auxiliary assemblies include contact blocks, wire harness, female connector and mounting bracket.
Z Only available for electrically held contactors.
œ Refer to Table 4.A for Return Spring part number for higher altitude contactors.