Rockwell Automation 1746-BTM Barrel Temperature Control Module User Manual - Manual (Page 76)

Publication 1746-UM010B-EN-P - April 2001
9-8 Sample Program
Table 9.F BTM50220.RSS M1, M0, Input Image, Output Image, and Rotator Code Data Table
Description See Page
NXX:0 Block header for the M1 configuration file 3-11
NXX:1 thru NXX:100 M1 configuration information 3-13
NXX:101 thru NXX:109 Reserved do not use NA
NXX:110 Block header for the M0 file 4-6
NXX:111 thru NXX:159 M0 file information 3-11, 4-6
NXX:160 thru NXX:199 Reserved. Do not use 6-2
NXX:200 thru NXX:203 Current set points NA
NXX:204 thru NXX:207 Current error PV-SP 5-8
NXX:208 thru NXX:211 Current CVs NA
NXX:212 thru NXX:215 Error codes NA
NXX:216 thru NXX:219 CJC temperatures NA
NXX:220 thru NXX:223 Firmware revision NA
NXX:224 thru NXX:227 P contribution 8-2
NXX:228 thru NXX:231 I contribution 2-6
NXX:232 thru NXX:235 D contribution 9-1
NXX:236 thru NXX:239 Pre-set point 4-4
NXX:240 thru NXX:243 Wait period 4-4
NXX:244 thru NXX:247 Reserved for future use 4-4
NXX:248 thru NXX:255 Reserved do not use NA
IMPORTANT
The XX in the data table address above will depend
on the data table location of the 1746-BTM. In the
example code it is N10.