Rockwell Automation 1738-IE2VM12 ArmorPoint 24V dc Analog Input Modules, Series A - Manual (Page 5)

Publication 1738-IN003B-EN-E - June 2005
ArmorPoint 24V dc Analog Input Modules, Series A 5
Install the mounting base as follows:
1. Lay out the required points as shown above in the drilling
dimension drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping
screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection.
The ground lug connection is also a mounting hole.
Ground lug connection
Latching mechanism
Keyswitch-
Set to position 3 for
the 1738 analog
input modules
Mounting base
43675