Rockwell Automation 1738-IE2VM12 ArmorPoint 24V dc Analog Input Modules, Series A - Manual (Page 7)

Publication 1738-IN003B-EN-E - June 2005
ArmorPoint 24V dc Analog Input Modules, Series A 7
Wire the Modules Following are wiring instructions for the ArmorPoint analog input
modules.
1738-IE2CM12 and 1738-IE2VM12
IMPORTANT
Analog modules have earth grounded metal rings.
This should be considered when choosing shielded
cables and grounding techniques.
ATTENTION
Make sure all connectors and caps are securely
tightened to properly seal the connections against
leaks and maintain IP67 requirements.
(view into connector)
Pin 1 - 24V dc
Pin 2 - Input 0 (M12-A)
Input 1 (M12-B)
Pin 3 - Common
Pin 4 - Common
Pin 5 - No Connect
43664