Rockwell Automation 1746-BAS BASIC LANGUAGE - Manual (Page 173)

Publication 1746-RM001A-US-P
Output Functions 12-23
Syntax
PUSH [remote device node address]
PUSH [starting element offset (x2) of remote device file]
PUSH [number of words to be transferred]
PUSH [message time-out value]
CALL 93
POP [status of message instruction]
Table 12.7 Output Argument
Decimal
Output Hexadecimal
Output Description
0 00 Successful Completion.
2 02 Target node cannot accept the message at this time.
3 03 Target node cannot respond because message is too large.
4 04 Target node cannot respond because it does not understand
the command parameters.
5 05 module is off-line (not on link).
6 06 Target node cannot respond because requested function is
not available.
7 07 Target node does not respond.
10 0A module detects illegal target node address.
11 0B module detects illegal file number.
12 0C module detects illegal target file element offset.
13 0D module detects illegal target file length.
14 0E module detects illegal time-out value.
16 10 Target node cannot respond because of incorrect command
parameters or unsupported command.
55 37 Message timed out (time-out value exceeded).
80 50 Target node is out of memory.
96 60 Target node cannot respond because file is protected.
231 E7 Target node cannot respond because length requested is too
large.
235 EB Target node cannot respond because target node denies
access.
236 EC Target node cannot respond because requested function is
currently unavailable.
241 F1 module detects illegal target file type.
250 FA Target node cannot respond because another node is file
owner (has sole file access).
251 FB Target node cannot respond because another node is
program owner (has sole access to all files).