Rockwell Automation 1746-BAS BASIC LANGUAGE - Manual (Page 240)

Publication 1746-RM001A-US-P
14-4 Setup Functions
CALL 105 – Reset PRT1 to
Default Settings Purpose
Use CALL 105 to reset the port parameters of port PRT1 to their default settings.
Table 14.3 lists the default parameters for port PRT1.
Syntax
CALL 105
Example
>1 REM EXAMPLE PROGRAM
>10 CALL 105
CALL 119 – Reset PRT2 to
Default Settings Purpose
Use CALL 119 to reset port parameters of PRT2 to their default settings. Table
14.4 lists the default port parameter settings for port PRT2.
Syntax
CALL 119
Example
>1 REM EXAMPLE PROGRAM
>10 CALL 119
Table 14.3 PRT1 Port Parameter Default Settings
PRT1 Port Parameters Default Setting
Baud rate 1200 baud
Number of data bits 8-bits
Number of stop bits 1-bit
Parity No parity
Handshaking Software handshaking
Table 14.4 PRT2 Port Parameter Default Settings
PRT2 Port Parameters Default Setting
Baud rate 1200 baud
Number of data bits 8-bits
Number of stop bits 1-bit
Parity No parity
Handshaking Software handshaking