Rockwell Automation 1746-BAS BASIC LANGUAGE - Manual (Page 43)

Publication 1746-RM001A-US-P
BASIC Commands 4-3
STOP - IN LINE 160
READY
>PRINT D,SU,AV
.86042573 0 0
>D = .5
>PRINT D,SU,AV
.5 0 0
>CONT
THE AVERAGE VALUE IS .48060383
READY
>
CONT Purpose
Use the CONT command to resume execution of a program stopped by a
[CTRL-C]
, BRKPNT command, or a STOP statement. If you stop a program by
pressing
[CTRL-C]
on the console device or by execution of a STOP statement,
you can resume execution of the program by typing CONT. If you press [CTRL-C]
while [CTRL-C] is enabled, it stops the program. Use CONT to continue. Between
the stopping and the re-starting of the program you may display the values of
variables or change the values of variables. However, you cannot CONTinue if the
program is modified during the STOP or after an error.
Syntax
CONT
IMPORTANT
[CTRL-C] clears all input and output buffers.