Rockwell Automation 1792D2B0LP ArmorBlock LP2 2 Sinking Input Module - Manual (Page 3)

ArmorBlock LP2 2 Sinking Input Module 3
Publication 1792D-5.43 - July 1999
Set the Node Address and Baud Rate
Set the node address using RSNetWorx for DeviceNet™ software,
DeviceNetManager™ software, or another software configuration tool.
The module is equipped with AutoBaud detect. AutoBaud lets the module
read the settings already in use on your DeviceNet network and
automatically adjusts to follow those settings.
Mount the Module
1. Attach the module using the dimensions shown below.
2. Connect the grey DeviceNet cable to the DeviceNet trunk. Use the
1485P-P1R5-MN5R1 T-Part tap to make the connection to round
media. Use the 1485P-P1E4-R5 to connect to the Kwik Link flat media
system.
I0 I1
Network Status Module Status
4.21 in
107mm
41954
1.02 in
26.0mm
1.95 in
49.5mm
12 in
305mm
0.25 in
6.25mm