Rockwell Automation 1792D2B0LP ArmorBlock LP2 2 Sinking Input Module - Manual (Page 5)

ArmorBlock LP2 2 Sinking Input Module 5
Publication 1792D-5.43 - July 1999
Input connectors for this module are shown below.
DeviceNet Cable
Refer to the DeviceNet Cable System Planning and Installation Manual,
publication DN-6.7.2, for more information on selecting the proper
DeviceNet cables for your application.
Communicate with Your ArmorBlock LP2 Module
This ArmorBlock module’s I/O is exchanged with the master through a
poll, change of state, or cyclic connection.
The module consumes and produces I/O data as follows:
Cyclic - allows configuration of the block as an I/O client. The block will
produce its I/O cyclically at the rate configured.
Type of I/O Connections Consumes Produces
Cyclic 0 Bytes 1 Byte
Polled 0 Bytes 1 Byte
Change of State 0 Bytes 1 Byte
Connector A
Input 0 Connector B
Input 1
41943
I0 I1
Network Status Module Status