Rockwell Automation 1790D-XXXX DeviceNet 32 Point Digital Base Terminal Block CompactBlock LDX I/O Series B User Manual
Page 19
DeviceNet 32 Point Digital Base Terminal Block CompactBlock LDX I/O 19
Publication
1790-IN014A-EN-P - March 2008
Enclosure type rating
Meets IP20
Isolation voltage
50V dc (continuous), Basic Insulation Type
Type tested at 500V ac for 60 s, I/O to system
No isolation between individual I/O channels
Mounting
DIN rail or panel
Wiring, terminal block
(M3.0) screw torque
0.9 Nm (8 lb-in)
Wire size
0.25... 2.5 mm² (22...14 AWG) solid or stranded copper wire
rated at 75 °C (167 °F ) or greater 1.2 mm (3/64 in.) insulation
max
Wiring category
(1)
2 - on signal ports
2 - on communication ports
Pilot duty rating
Not Rated
North American
temperature code
T4
(1)
Use this conductor category information for planning conductor routing as described in Industrial
Automation Wiring and Grounding Guidelines, publication 1770-4.1.
General
Attribute
Value