Rockwell Automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input and Output - Manual (Page 11)

1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input and Output Modules 11
Publication 1732E-IN006C-EN-E - June 2013
Micro-style M12 5-Pin Input Female Connector – 1732E-OF4M12R
Ethernet Connector
D-Code Micro Network Female Connector
IMPORTANT Use the 1585D–M4DC–H: Polyamide small body unshielded mating
connectors for the D-Code M12 female network connector.
Note that the distance between the center of each Ethernet connector is
16.2 mm (see Module Dimensions on page 9). Rockwell Automation
recommends the use of suitable cable based on this measurement. Some
of the recommended cables are 1585D-M4TBJM-x and 1585D-M4TBDM-x
for daisychains.
3
4
1
2
5
45868
(View into connector)
Pin 1 Current Output +
Pin 2 Current Common
Pin 3 Voltage Output +
Pin 4 Voltage Common
Pin 5 No Connect
3
4
1
2
5
(View into connector 1)
Pin 1 M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_Tx-
Pin 4 M12_Rx-
Pin 5 Connector shell shield GND
44808