Rockwell Automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Installation Instructions - Manual

Publication 1784-IN041A-EN-P – June 2003
Installation Instructions
16 Axis PCI SERCOS interface Card
(Catalog Number 1784-PM16SE)
This document provides the instructions for installing the 16 Axis PCI
SERCOS interface
TM card (1784-PM16SE) in a PC computer using the
Windows TM 2000/NT/XP operating system.
Before you install your card you need a PC computer with an open 32 bit
local PCI Bus slot. PCI Bus configuration:
The PC should meet the following recommended configuration:
1
The SoftLogix 5800 controller has only been tested and qualified on genuine Intel processors.
Personal Computer Expansion Bus
Bus Type One Primary PCI
Bus Speed PCI- 33MHz
Bus Signaling 5 VDC or 3.3 VDC Universal
Expansion Size 32-bit Slot
4.2 in (10.67 cm) High
6.95 inches (17.65 cm) long
Category Requirement
Personal computer Pentium TM II 300MHz or Celeron 300A processor
Pentium TM III 600 MHz recommended
1
Operating System Microsoft Windows NT version 4.0 with Service Pack 6A
or Microsoft Windows 2000 with Service Pack 2 or
Microsoft Windows XP.
RAM 128 Mbytes of RAM minimum
Hard Disk Space 50 Mbytes of free hard disk space
Video Requirements 256 - color, 800 X 600 video resolution minimum