Rockwell Automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Installation Instructions User Manual
Page 25
16 Axis PCI SERCOS interface Card 25
Publication 1784-IN041A-EN-P – June 2003
The Communication Phase LED
The Communication Phase (CP) LED provides information as to what
phase the SERCOS link is in.
SERCOS Communication Phase Status Using the CP Indicator
1784-PM16SE Card Specifications
If the CP LED displays:
Then the card status is:
Solid Orange
In Phase -1: Autobaud detection in progress.
Off
In Phase 0: looking for a closed ring.
Flashing Red
In Phase 1: looking for active nodes.
Alternating Red/Green
In Phase 2: configuring nodes for
communication.
Flashing Green
In Phase 3: configuring device specific
parameters
Solid Green
In Phase 4: configured and active.
Number of Nodes
16 axes maximum
Card location
32 bit 33MHz primary PCI Bus slot
Card keying
3.3 / 5 VDC universal
Power Dissipation
7.5 W maximum
Backplane Current
5 VDC @ 1.065 A and 3.3 VDC @ 0.050 A
1
Environmental Specifications
Slot Temperature
Storage temperature
Relative Humidity
0-60
° C (32-140° F)
-40 to 85ºC (-40 to 185ºF)
30 to 95% non condensing IEC 68-2-30
Shock
Operating
Non-operating
30g peak acceleration, 11(
±1)ms pulse width
50g peak acceleration, 11(±1)ms pulse width
Vibration
2g @ 10-150Hz per IEC 68-2-6