Rockwell Automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Installation Instructions - Manual (Page 8)

8 16 Axis PCI SERCOS interface Card
Publication 1784-IN041A-EN-P – June 2003
Preventing Electrostatic Discharge
Power Source
All power for the SERCOS interface card (1784-PM16SE) is taken from the
host PC via the PCI connector. No user provided field electric power source
is needed. The PC chassis supplies all power for internal operation and fiber
optic energy.
Identifying Card Components
The following diagrams provide two views of the 1784-PM16SE card. The
first diagram is a side view which shows the orientation of the card, the
connection to the PCI Bus, and the product label. The second diagram is a
front view which shows the position of the cable connections, the LEDs,
and the Card Identification Switch.
ATTENTION
!
This equipment is sensitive to electrostatic discharge
(ESD), which can cause internal damage and affect
normal operation. Follow these guidelines when you
handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wrist strap.
• Do not touch the connectors or pins on component
boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in appropriate
static-safe packaging.