Rockwell Automation 1769-OG16 Compact TTL Output Module User Manual
Compact ttl output module, Installation instructions, About this publication
Advertising
Publication 1769-IN078A-EN-P - May 2006
Installation Instructions
Compact TTL Output Module
Catalog Number 1769-OG16
About This Publication
Use this document as a guide when installing a Compact TTL Output Module.
Topic
Page
Replace a Single Module Within a System
Remove the Finger-safe Terminal Block
Wire the Finger-safe Terminal Block
Advertising
Table of contents
Document Outline
- 1769-IN078A-EN-P, Compact TTL Output Module Installation Instructions
- About This Publication
- Important User Information
- Prevent Electrostatic Discharge
- Remove Power
- Hazardous Location Considerations
- About the 1769-OG16 Module
- Install the 1769-OG16 Module
- Replace a Single Module Within a System
- Mount Expansion I/O
- Mount Module to Panel
- Mount Module to Panel Using the Dimensional Template
- Mount Module to Panel Procedure Using Modules as a Template
- Mount Module to DIN Rail
- Wire the 1769-OG16 Module
- Ground the 1769-OG16 Module
- Remove the Finger-safe Terminal Block
- Wire the Finger-safe Terminal Block
- Configure the 1769-OG16 Module
- Output Data File
- Input Data File
- Configuration File
- Program State Word
- Program Value Word
- Fault State Word
- Fault Value Word
- Program to Fault Enable Bit (PFE)
- Module Default Condition
- Specifications
- Additional Resources
- Back Cover