Rockwell Automation 1792D-0BT16LP ArmorBlock LP2 16 Sourcing Output Module - Manual (Page 5)

ArmorBlock LP2 16 Sourcing Output Module 5
1792D-5.49 - August 1999
Output connectors for this module are shown below.
Communicate with Your ArmorBlock LP2 Module
This ArmorBlock module’s I/O is exchanged with the master through a
polled, change of state, or cyclic connection.
The module produces output data as follows:
Cyclic - allows configuration of the block as an I/O client. The block will
consume and produce its I/O cyclically at the rate configured.
Polled - a master initiates communication by sending its polled I/O
message to the module. The 16 output module consumes the message,
updates outputs, and producing a response. The response has output faults
and the status of the Auxiliary power.
Type of I/O Connections Consumes Produces
Cyclic 2 Bytes 1 Byte
Polled 2 Bytes 1 Byte
Change of State 2 Bytes 1 Byte
O-4
O-5
O-6
O-7
O-11
O-10
O-2
O-3
O-13
O-12
O-9
O-8
Network Status Module Status
O-0
O-1
O-15
O-14
Auxiliary Power
42049
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 15
Output 14
Output 13
Output 12
Output 11
Output 10
Output 9
Output 8
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E