Apply power to your dh485/rs-232c module – Rockwell Automation 1747-KE DH-485/RS-232C INTERFACE MODULE User Manual
Page 16

16 DH485/RS-232C Interface Module
Publication 1747-IN006B-EN-P - October 2005
The 1747-C13 cable can also connect the interface module’s DH485 port directly to
a single SLC controller or fixed controller. It connects the DH485 port on the
module to the DH485 port on the SLC 500 controller.
Figure 18 Interface Module Connected to SLC 500 Controller
Apply Power to Your DH485/RS-232C Module
Once you have installed your DH485/RS-232C interface module in your SLC 500
system, you are already to apply power to your SLC 500 system.
Battery Replacement, Handling, Storage, and Transportation
(Cat. No. 1747-BA)
Your module provides back-up power for RAM through a replaceable lithium
battery (cat. no. 1747-BA). This battery provides back-up for approximately five
years. A BAT LOW indicator on the front of the module alerts you when the battery
voltage has fallen below the replace battery threshold level.
SLC Controller
Interface Module (1747-KE)
DH485 Port
Cable (1747-C13)