Figure 3 jumper locations – Rockwell Automation 1747-KE DH-485/RS-232C INTERFACE MODULE User Manual
Page 7
![background image](/manuals/579511/7/background.png)
DH485/RS-232C Interface Module 7
Publication 1747-IN006B-EN-P - October 2005
functionality and mode of the interface module. The horizontal or vertical
orientation of the jumper determines the module’s functionality.
The position of the jumper determines the module’s mode (Configuration or Run),
and thus, which method is used to configure the module (ASCII terminal or
backplane communications).
Figure 3 Jumper Locations
ATTENTION
Do not expose the module to surfaces or other areas that may
typically hold an electrostatic charge. Electrostatic charges can
alter or destroy memory.
ATTENTION
Settings other than those shown for each jumper may cause
damage to the module.
SLC 500
INTERACE MODULE
CA
T
SER
SERIAL
NO.
FRN
1
2
3
4
5
6
7
8
9
CONFIG
1
2
3
4
5
6
7
8
9
DF1
DH485
JW1
JW2
JW4
Battery