Rockwell Automation 1734-AENTR POINT I/O 2 Port EtherNet/IP Adapter - Manual (Page 19)

POINT I/O 2 Port Ethernet Adapter 19
Publication 1734-IN040B-EN-P - December 2009
POINTBus
status Off Device is not online.
Device has not completed Dup_MAC_ID test.
Device not powered - check module status indicator.
Flashing green Device is online but has no connections in the established
state.
Firmware (NVS) update in progress.
Solid green Adapter online with connections established.
Flashing red Recoverable fault occurred:
• At cycle power, the number of expected modules
does not equal the number of modules present.
• A module is missing.
• Node fault (I/O connection timeout) occurred.
Solid red Unrecoverable fault occurred - the adapter is bus off.
Flashing
red/green LED powerup test is in progress.
System
power Off Not active. Adapter power is off or there is a DC-DC
converter problem.
Solid green System power is on. DC-DC converter output is active (5V).
Field power Off Not active. Adapter power is off.
Solid green Power is on. 24V input is present.
Indicator State Description