Rockwell Automation 1764-xxxx MICROLOGIX 1500 PROGRAMMABLE CONTROLLERS - Manual (Page 27)

1 Publication 1764-UM001B-EN-P - April 2002
Chapter
2
Installing Your Controller
This chapter shows you how to install your controller system. The
only tools you require are a Flat or Phillips head screwdriver and drill.
Topics include:
•
agency certifications
•
compliance to European Union Directives
•
using in hazardous locations
•
master control relay
•
power considerations
•
preventing excessive heat
•
controller spacing
•
mounting the controller
Agency Certifications
•
UL 508
•
C-UL under CSA C22.2 no. 142
•
Class I, Division 2, Groups A, B, C, D
(UL 1604, C-UL under CSA C22.2 no. 213)
•
CE compliant for all applicable directives
Compliance to European
Union Directives This product has the CE mark and is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2
EMC - Generic Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2
EMC - Generic Immunity Standard, Part 2 - Industrial
Environment
This product is intended for use in an industrial environment.