Rockwell Automation 1764-xxxx MICROLOGIX 1500 PROGRAMMABLE CONTROLLERS - Manual (Page 85)

Publication 1764-UM001B-EN-P - April 2002
Communication Connections 4-17
1761-CBL-AC00
1747-CP3
Cable Length Connections from to AIC+ External Power
Supply Required
(1)
Power Selection
Switch Setting
(1)
1747-CP3
1761-CBL-AC00 3m (9.8 ft)
45cm (17.7 in) 1764-LRP processor, channel 1 port 1 yes external
SLC 5/03 or SLC 5/04 processor, channel 0 port 1 yes external
PC COM port port 1 yes external
PanelView 550 through NULL modem adapter port 1 yes external
DTAM Plus / DTAM Micro™ port 1 yes external
Port 1 on another AIC+ port 1 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
user supplied cable
Cable Length Connections from to
AIC+ External Power
Supply Required
(1)
Power Selection
Switch Setting
(1)
straight
9-25 pin — modem or other communication device port 1 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
1761-CBL-AS03
1761-CBL-AS09
Cable Length Connections from to AIC+ External Power
Supply
Required
(1)
Power
Selection
Switch
Setting
(1)
1761-CBL-AS03
1761-CBL-AS09 3m (9.8 ft)
9.5m (31.17 ft) SLC 500 Fixed,
SLC 5/01, SLC 5/02, and SLC 5/03 processors port 3 yes external
PanelView 550 RJ45 port port 3 yes external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.