1 - installing your controlnet plc-5 processor, Using this chapter, Installing your controlnet plcć5 processor – Rockwell Automation 1785-L20C_L40C, D17856.5.14 ControlNet PLC-5 Programmable Controllers User Manual User Manual
Page 9
Chapter
1
1-1
Installing Your ControlNet PLCĆ5 Processor
If you want to read about:
Go to page:
Completing the preliminary setup
Checking the contents of the processor package
Handling the processor
Identifying the processor channels/connectors
Setting the I/O chassis backplane switches
Setting the I/O chassis configuration plug
Installing keying bands for the processor
Installing and disposing of the processor battery
Selecting the Data Highway Plust (DH+t) station address of Channel 1A
Specifying the serial interface for Channel 0
Selecting the ControlNet network address of Channel 2
Inserting/removing the processor into/from the I/O chassis
Installing a remote I/O link
Installing a DH+ link
Connecting to a ControlNet network
Connecting a programming terminal
Selecting appropriate cables
For detailed information on installing chassis and adapters, see the
Enhanced and Ethernet PLC-5 Programmable Controllers User Manual,
publication 1785-6.5.12.
Using This Chapter
More