Rockwell Automation 1768-M04SE CompactLogix SERCOS interface Module Installation Instructions - Manual (Page 22)

22
Publication 1768-IN005A-EN-P - December 2005
Flashing
Green Flashing
Green Flashing
Green Check the configuration of the axes in RSLogix 5000
software.
Solid
Green Solid
Green Flashing
Green
• Check the configuration of the drives in RSLogix 5000
software.
• Check the motion group, drives, and axes for faults.
Solid
Green Solid
Green Solid
Green None — the axes are ready.
Solid
Green Solid
Green Flashing
Red Check the motion group and axes for faults.
Solid
Red Solid
Red Solid
Red 1. Cycle power to the module.
2. If the lights keep turning solid red, contact your
distributor, Rockwell Automation
representative, or Rockwell Automation
support.
If the lights on the module
look like this Then do this
CP Ring OK