Rockwell Automation 1756-DMF30 ControlLogix Drive Module-Instructions - Manual (Page 14)

14 ControlLogix™ Drive Module
Publication 1756-IN577B-EN-P – July 2001
Hazardous Location Information
This information applies when operating this equipment in hazardous
locations.
Products marked “CL I, DIV 2, GP A, B, C, D” are suitable for use in
Class I Division 2 Groups A, B, C, D, Hazardous Locations and
nonhazardous locations only. Each product is supplied with markings
on the rated nameplate indicating the hazardous location temperature
code. When combining products within a system, the most adverse
temperature code (lowest “T” number) may be used to help
determine the overall temperature code of the system. Combinations
of equipment in your system are subject to investigation by the local
authority having jurisdiction at the time of installation.
!
WARNING: EXPLOSION HAZARD
• Do not disconnect equipment unless power has been
removed or the area is known to be nonhazardous.
•
Do not disconnect connections to this equipment unless
power has been removed or the area is known to be
nonhazardous. Secure any external connections that mate to
this equipment by using screws, sliding latches, threaded
connectors, or other means provided with this product.
• Substitution of components may impair suitability for Class I,
Division 2.
•
If this product contains batteries, they must only be changed
in an area known to be nonhazardous.