Rockwell Automation 1756-DMF30 ControlLogix Drive Module-Instructions - Manual (Page 6)

6 ControlLogix™ Drive Module
Publication 1756-IN577B-EN-P – July 2001
Install the Module
You can install or remove the module while chassis power is applied.
1. Align circuit board with top and bottom chassis guides.
!
ATTENTION: The module is designed to support Removal and
Insertion Under Power (RIUP). However, when you remove or
insert the module with power applied,
unintended machine
motion or loss of process control can occur . Exercise extreme
caution when using this feature.
POWER
Printed
Circuit
Board