Rockwell Automation 1756-DMF30 ControlLogix Drive Module-Instructions - Manual (Page 4)

4 ControlLogix™ Drive Module
Publication 1756-IN577B-EN-P – July 2001
Prevent Electrostatic Discharge
Compliance to European Union Directive
If this product bears the CE marking, it is approved for installation
within the European Union and EEA regions. It has been designed
and tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2 EMC – Generic Emission Standard, Part 2 – Industrial
Environment
•
EN 50082-2 EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
This product is intended for use in an industrial environment.
!
ATTENTION: Electrostatic discharge can damage integrated
circuits or semiconductors if you touch backplane connector pins.
Follow these guidelines when you handle the module:
•
Touch a grounded object to discharge static potential.
•
Wear an approved wrist-strap grounding device.
• Do not touch the backplane connector or connector pins.
•
Do not touch circuit components inside the module.
• If available, use a static-safe work station.
•
Keep the module in its static-shield box when not in use.
•
Keep fiber optic dust covers installed when not in use.