Rockwell Automation 1771-IBN DC (10-30V) INPUT Module Installation Instructions User Manual
Page 9
Advertising
DC (10...30V) Input Module 9
Publication 1771-IN028D-EN-P - October 2008
• For a 1771-A1B, 1771-A2B, 1771-A4B I/O chassis, swing the chassis locking bar
down into place to secure the modules, making sure the locking pins engage.
2. Attach the 1771-WN wiring arm to the horizontal bar at the bottom of the I/O
chassis noting the wiring arm pivots upward and connects with the module so you
can install or remove the module without disconnecting the wires.
Advertising