Rockwell Automation 1788-EN2PAR Redundant EtherNet/IP to PROFIBUS PA Linking Device Quick Start - Manual (Page 3)

Redundant EtherNet/IP to PROFIBUS PA Linking Device 3
• A PROFIBUS PA network using the IEC61158-2 cable color coding.
Configuration
Complete the following instructions to configure the 1788-EN2PAR linking device.
Configure the Ethernet Address
The module has BOOTP enabled when
shipped. You can set an address via a
BOOTP server or set the hardware
switches to a specific IP address. See Use
BOOTP to Set the IP Address on page
4 , or Use Switches to Set the IP Address
on page 4 for details. The switches can be
found under the front cover of the
module.