Rockwell Automation 1788-EN2PAR Redundant EtherNet/IP to PROFIBUS PA Linking Device Quick Start - Manual (Page 5)

Redundant EtherNet/IP to PROFIBUS PA Linking Device 5
5. Open the 1788-EN2PAR linking device’s Module Properties dialog box and click
the Configuration tab.
6. Configure the linking device by setting the required Topology mode and Max Scan
Address.
7. Download the configuration to your controller.
8. Go online with the controller to see all attached field devices, which will appear in
the Configuration tree on the left side below the Master.
Field devices can now be configured.
Operation
The following features can be used to view the data and status of the field devices connected to
the 1788-EN2PAR linking device.