Rockwell Automation 1766-L32xxx MicroLogix 1400 Programmable Controllers Web Server User Manual - Manual (Page 10)

Publication 1766-UM002A-EN-P - November 2008
8 Use Data Views to Access Controller Data
Change an Access Group Each data view contains a group of files that you want to monitor.
Each MicroLogix 1400 controller can support multiple data views. One
browser supports only one data view, so if you want to look at many
data views, you need to run a corresponding number of browsers.
You change an access group from the Data Views
→
New Data View page.
1. From the Access Group pull-down menu of the given data table
file, choose one of the following access group types:
•
Administrator (all access)
•
Write (read/write access only)
•
Read (read access only)
2. Choose Administrator, Write, or Read from the Access Group
pull-down menu to change a file's access group.
3. Click Apply to change an access group for the data table file
you specified.