Rockwell Automation 1766-L32xxx MicroLogix 1400 Programmable Controllers Web Server User Manual - Manual (Page 14)

Publication 1766-UM002A-EN-P - November 2008
12 Use Data Views to Access Controller Data
4. Click OK to change the value.
The following screen appears when the value is successfully
saved into the server.
If the following screen appears, the value is not saved and the
value returns to the original value.
If you want to change the data in Decimal, click the pull-down menu
to change the Display As to Decimal and follow the steps described.
The steps also apply to the String type.
Disable Web View Using RSLogix 500/RSLogix Micro V8.10 or higher, you can disable
individual data files from being viewed via any web browser by
selecting the data file’s properties page and checking the Web View
Disable checkbox as shown below. Any data file property changes
must be made offline and downloaded to the processor or later.