Rockwell Automation F1770-KFC(D)15 INSTL INSTR FLASH FIRMWARE KIT - Manual

Publication 1770-5.9 - May 1998
Installation Instructions
Flash Firmware Kit
Catalog Number F1770-KFC(D)15
What’s in These
Installation Instructions? These installation instructions describe how to upgrade the
1770-KFC and 1770-KFCD ControlNet
TM RS-232 Interface Module
firmware from ControlNet phase 1.25 to phase 1.5.
Important: A qualified service technician must perform the firmware
upgrade procedure.
The upgrade procedures apply to the 1770-KFC and 1770-KFCD
modules listed below. You can find the series and revision on the
product ID label on the bottom of the module as shown in the figure
to the left.
• 1770-KFC, series A, revision A (non-CE module)
• 1770-KFC, series B, revision A (CE module)
• 1770-KFCD, series A, revision A (CE module)
Before You Begin Important: The 1770-KFC series A requires a factory hardware
modification before it can be upgraded. If it has been
modified, you will see “1770-KFCD Phase 1.5” on the
label. If you have a series A module that needs to be
modified, exchange it through the Allen-Bradley parts
hub through your local sales office.
What the Kit Contains The 1770-KFC and 1770-KFCD firmware upgrade kit includes:
• one jumper
• one disk with flash utilities and binary files
• one patch label
• these Flash Firmware Kit Installation Instructions
SAVE
VIEW DATA EXIT
30580-M
Bottom of Module
Label