Rockwell Automation F1770-KFC(D)15 INSTL INSTR FLASH FIRMWARE KIT - Manual (Page 7)

Flash Firmware Kit 7
Publication 1770-5.9 - May 1998
You see this screen:
Look at the front of the module. The HOST LED blinks green,
the A LED blinks red, the B LED is off, and the STATUS LED is
solid green during the download.
When the download is complete, you see the following message:
Code Download into KFCD Flash Memory Succeeded
If you see an error message, go to the troubleshooting section on
page 9.
2. At the prompt, enter the following command:
DLOAD2 BOOTD15.BIN COM1 38 0
Change the COM port and baud rate if necessary, based on your
computer’s serial port and baud rate.
You see this screen:
Look at the front of the module. The HOST LED blinks green
and the STATUS LED blinks red during the download.
KFC flash memory download utility - Version 0.8
Copyright 1994 by the Allen-Bradley Company
Succeeded Opening binary image file ‘KFC15D.BIN’ to download
---------Downloading binary image to KFCD flash memory
KFC flash memory download utility - Version 0.8
Copyright 1994 by the Allen-Bradley Company
---------Downloading binary image to KFCD (MacId#) flash memory