Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual - Manual (Page 19)

Rockwell Automation Publication 1734-UM018B-EN-P - October 2013 9
Overview of the 1734 POINT I/O EtherNet/IP Adapter Chapter 1
Understand Messaging
Class 3 (Explicit Message) requests through the 1734-AENT adapter to a specific
POINT I/O module may not always receive a response from the I/O modules. In
the case where the I/O module does not reply to the request, the adapter
responds with an error code indicating a timeout.
Configure Autobaud
The adapter cannot reconfigure an I/O module that you previously configured to
operate at a fixed communication rate. When you reuse a POINT I/O module
from another POINT I/O system, configure the module to autobaud before
using it with the adapter.
Chapter Summary In this chapter, you were introduced to the features of the POINT I/O Adapter,
and considerations for its installation and usage.